The upper material is a proven polyester laminated with an impermeable membrane, equipped with a diamond-shaped RipStop treatment that increases the durability of the fabric and prevents it from tearing in the event of a tear.
The two valves are made of nylon and the draining one is also equipped with a silicone flap for 100% sealing.
The chambers of the mat are connected in an H shape. This design does not create cold joints and at the same time prevents the air inside from swirling. In addition, BHB microfiber insulation is glued to the chambers on the inside, which significantly increases thermal comfort.
Thanks to the integrated pump, you will no longer have to struggle with inflation. Simply open the valve and after two minutes of stomping, you're ready to lie down.
The integrated foot pump is in principle a very simple device. It consists of a chamber made of impermeable foam, a one-way valve and a lid. After you open the lid, the chamber fills with air. Your task is to step on the entire chamber so that you block the opening with your foot and push the air out of the chamber through the flap into the mat. Then you lift your foot so that new air from the outside enters the chamber and step down again as described above. Repeat this until the mat is inflated and then close the lid.
In order to prevent air leakage through the top fabric of the mattress, an impermeable membrane is laminated on the Polyester fabric. Lamination of a continuous membrane instead of applying a screed eliminates the possibility of applying an uneven layer of screed in places with material irregularities. This can lead to the application of an insufficient coating layer and air leakage in such affected areas. The use of PU foam with a thermally laminated membrane (TPU) is the highest quality material combination on the market today.
The upper and lower fabrics are not connected directly, which would create cold joints, instead they are connected by a partition that holds the shape and at the same time allows for perfect thermal insulation. In addition, a thin layer of BHB Micro insulation is attached to the inside of the chambers, which maximizes the insulation effect while having almost no effect on weight and packability.
Technical specification
| features: | |
| Dimensions | 195 x 65 x 9 cm |
| Shape | Rectangle |
| Weight | 1050 g |
| Upper material | Polyester Diamond RipStop, TPU Lamination |
| Bottom material | Polyester Diamond RipStop, TPU Lamination |
| Valve | |
| Repair kit | Yes |
| Carry bag | Yes |
| Type | Inflatable |
| Height | 6 cm and more |
| Package Size | ⌀13 x 36 cm |
| features: | |
| Estimated value of heat resistance | 1.8 R |
No reviews found