Matrix 38 NX
The anatomical shape of this mat predestines it for action use, i.e. wherever there is a need to reduce the weight and volume of the packed mat. Its dimensions, in turn, indicate that it will be suitable for larger and shoulderier figures who cannot cope with its smaller sibling, the Peak 38 NX .
The construction with two layers of relatively large horizontal cavities saves even more the weight of the mat, while maintaining relatively high thermal comfort.
Even after being inflated, the cavities form a pleasant wavy structure of the mat.
Grinding the top layer of the material increases its friction, so your sleeping bag will not slip off the mat.
The double high flow valve provides easy inflation of the mat without air escaping when it is closed. Pressure in the mattress can be regulated by pressing the valve. After opening the second layer, the valve is fully open and the mat can be easily deflated.
Technical parameters
| Dimensions | 198 x 62 x 3.8 cm |
| Face | Mummy |
| Mass | 960 g |
| Foam construction | DHC - Double horizontal chambers |
| Foam | Polyurethane |
| Outer material | Brushed polyester - non-slip, TPU Lamination |
| Bottom material | Polyester, TPU lamination |
| Valve | DLF - Dual layer flat valve |
| Repair set | Yes |
| Transport packaging | Yes |
| Type | Self-inflating |
| Height | 3-5 cm |
| Dimensions after packing | ⌀17 x 32 cm |
DLF - Dual layer flat valve
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mat.
After opening the top layer of the valve, the mat can be easily inflated thanks to the non-return flap without loss of pressure. By pushing the flap, the pressure in the mattress can be gently regulated. After opening the second layer, the valve is fully open and the mat can be easily deflated.
DHC - Double horizontal chambers foam construction
The construction of wide horizontal chambers in two layers combines the maximum possible foam relief with the highest possible thermal resistance achieved by preventing air circulation in the mattress and separating the individual layers of the chambers with foam. When inflated, the wide chambers are shaped into cylinders, which significantly increase the comfort of the mattress.
No reviews found