$tab
$key
Matrix 25
It's no secret that the Matrix type is simply the larger twin of the Peak type, so it is especially suitable for larger figures.
Thanks to the use of a construction with vertical cavities and the bevelling of the mat in the area of the feet, we have achieved great packability while maintaining the same comfort and very good thermal insulation.
The nylon screw valve is designed in such a way that you will not lose the cap. Plus, when inflating, just push it and the valve closes, giving you plenty of time to screw it on.
Matrix mats are wider and longer and therefore suitable for users with larger figures. If your build is athletic to slim, we recommend considering the Peak 25 mat , which has identical features but a smaller footprint and is therefore lighter and more packable.
Technical parameters
| Parameters | |
| Dimensions | 198 x 63 x 2.5 cm |
| Face | Mummy |
| Mass | 920 g |
| Foam construction | Vertical cavities |
| Foam | Polyurethane |
| Outer material | Polyester Ripstop Diamant, non-slip print, TPU lamination |
| Bottom material | Polyester, TPU lamination |
| Valve | Nylon |
| Repair set | Yes |
| Transport packaging | Yes |
| Type | Self-inflating |
| Height | up to 3 cm |
| Dimensions after packing | ⌀13 x 34 cm |
| Temperatures | |
| Approximate value of thermal resistance | 2.5 R |
Lamination
In order to prevent air leakage through the top fabric of the mattress, an impermeable membrane is laminated on the Polyester fabric. Lamination of a continuous membrane instead of applying a screed eliminates the possibility of applying an uneven layer of screed in places with material irregularities. This can lead to the application of an insufficient coating layer and air leakage in such affected areas. The use of PU foam with a thermally laminated membrane (TPU) is the highest quality material combination on the market today.
Foam
The core of every self-inflating mattress is the inner foam. Pinguin mattresses are filled with Polyurethane foam, the open pores of which retain air and thus give it excellent insulating properties. The foam has a very good shape memory, which contributes to its quick inflation and does not sag even after years of frequent use.
Valve
We purposefully use Nylon valves on our mats. The reason for their use instead of brass valves is their 100% tightness caused by the partial flexibility of the material, low weight and increased resistance to freezing. The nylon used on the valves is strong and tough enough.
Vertical cavities
Densely distributed vertical cavities in the foam guarantee the low weight of the mat and its very good packability. This type of mat construction is suitable for use from spring to autumn.
No reviews found