Finish Line's 1-Step is engineered for cyclists seeking a quick, one-step clean and lube formulation. As 1-Step flushes out contaminants and old lube, it leaves behind a clean new film of low friction lubricant. For cyclists on the go, 1-Step is the perfect choice for maintaining your bicycle's drivetrain. 1-Step is recommended for cyclists who take a minimalist approach to drivetrain maintenance. It is formulated with rust and corrosion inhibitors that provide ultimate protection in extreme conditions including coastal salt air. 1-Step does not compromise on its ability to reduce pedaling friction over long intervals, often exceeding 160 kilometers. Professional mechanics also use 1-Step to free gummed-up shifters and stiff cables. Convenient application from an aerosol can. Aerosol is more effective at removing grime than drip version.
Recommended for dry weather conditions, but can be used as an universal lube
Requires more frequent lubing than Wet lubes
Less resistant to water due to less stickiness
With rust and corosion inhibitors
Volume: 236ml
Application type: Aerosol
NOTE:
In case of a very dirty chain, before using this product remove biggest chunks of grime with a brush or a rag.
If you have disc brakes - make sure you do not direct aerosol flow onto the disc. If lubricant will get onto the disc, you may loose some braking performance and brakes will make loud squeeky noise.
Drip version video:
Recommended for dry weather conditions, but can be used as an universal lube
Requires more frequent lubing than Wet lubes
Less resistant to water due to less stickiness
With rust and corosion inhibitors
Volume: 236ml
Application type: Aerosol
NOTE:
In case of a very dirty chain, before using this product remove biggest chunks of grime with a brush or a rag.
If you have disc brakes - make sure you do not direct aerosol flow onto the disc. If lubricant will get onto the disc, you may loose some braking performance and brakes will make loud squeeky noise.
Drip version video:
Brand
FINISH LINE
No reviews found