Cyclus Tools develops and produces top quality tools for professional bicycle repair shops, but of course its also appropriated for hobby technicians. Produced in Europe, these durable tools are permanently proofed by our quality checks. With furnitures for your workshop or cosmetic care products the portfolio is rounded off very well. For every problem Cyclus Tools offers solutions. Cyclus Tools counts among the leading manufacturers of tools for bicycles. To stay at the top we continuously enhance our products for todays fast changing conditions.
Boost your workshop service performance with a Snap.In tools by Cyclus Tools is an innovative tool system which allows more than 30 different tools with only one holder. The plug-in system allows different variations of the tool attachments to be quickly and easily engaged for use.
This tool requires Snap.In holder!
CYCLUS TOOLS sanp.in bearing puller tool.
With the snap.in extractor you can pull oout press-fit bearings from the bearing cups as well as bottom bracket cups from the bottom bracket housing.
The extractor is suitable for bearings with an inner diameter of 22-30 mm.
The outer diameter of the bearing shells may be max. 45 mm.
Not suitable for OS-Press-Fit cups BB.386 (86,5x46)
When using the extractor, always pay attention to the correct position of the extractor claws behind the bearing / bearing cup to be removed.
When removing, depending on the diameter of the bearings, use the enclosed adapter ring.
To use the Press-Fit extractor you need the snap.in tool holder SN.50-W. (code 7202750)
Boost your workshop service performance with a Snap.In tools by Cyclus Tools is an innovative tool system which allows more than 30 different tools with only one holder. The plug-in system allows different variations of the tool attachments to be quickly and easily engaged for use.
This tool requires Snap.In holder!
CYCLUS TOOLS sanp.in bearing puller tool.
With the snap.in extractor you can pull oout press-fit bearings from the bearing cups as well as bottom bracket cups from the bottom bracket housing.
The extractor is suitable for bearings with an inner diameter of 22-30 mm.
The outer diameter of the bearing shells may be max. 45 mm.
Not suitable for OS-Press-Fit cups BB.386 (86,5x46)
When using the extractor, always pay attention to the correct position of the extractor claws behind the bearing / bearing cup to be removed.
When removing, depending on the diameter of the bearings, use the enclosed adapter ring.
To use the Press-Fit extractor you need the snap.in tool holder SN.50-W. (code 7202750)
Brand
CYCLUS TOOLS
Keine Bewertungen gefunden