$tab
$key
Nomad 75
A rectangular mat with a width of almost 65 cm will ensure your maximum comfort. It's the perfect choice for those of us who like to roll around. The height of up to 9.3 cm, in turn, ensures ideal damping of the unevenness of the base.
The construction with two layers of relatively large horizontal cavities above each other saves even more the weight of the mat, while maintaining high thermal comfort.
Even after being inflated, the cavities form a pleasant wavy structure of the mat.
Grinding the top layer of the material increases its friction, so your sleeping bag will not slip off the mat.
The double high flow valve provides easy inflation of the mat without air escaping when it is closed. By pressing the valve, the pressure in the mat can be regulated when it is overblown.
Technical parameters
| Dimensions | 200 x 63 x 7.5 cm |
| Face | Rectangle |
| Mass | 1760 g |
| Foam construction | DHC - Double horizontal chambers |
| Foam | Polyurethane |
| Outer material | Brushed polyester - non-slip, TPU Lamination |
| Bottom material | Polyester, TPU lamination |
| Valve | DLF - Dual layer flat valve |
| Repair set | Yes |
| Transport packaging | Yes |
| Type | Self-inflating |
| Height | 6 cm and more |
| Dimensions after packing | ⌀26 x 33 cm |
DLF - Dual layer flat valve
Flat two-layer valve with check valve for easier inflation/deflation and pressure regulation in the mat.
After opening the top layer of the valve, the mat can be easily inflated thanks to the non-return flap without loss of pressure. By pushing the flap, the pressure in the mattress can be gently regulated. After opening the second layer, the valve is fully open and the mat can be easily deflated.
DHC - Double horizontal chambers foam construction
The construction of wide horizontal chambers in two layers combines the maximum possible foam relief with the highest possible thermal resistance achieved by preventing air circulation in the mattress and separating the individual layers of the chambers with foam. When inflated, the wide chambers are shaped into cylinders, which significantly increase the comfort of the mattress.
Nie znaleziono opinii