$tab
$key
Traditional and dependable vulcanizing patch kit. Contains rubber vulcanizing adhesive (7cc), eight patches (6 round, 2 oval), stainless steel scuffer and an emergency tire boot.
SPECS:
Weight:
26g
Dimensions:
96.5mm, 44.3mm, 19.2mm
USING A PATCH KIT TO FIX A FLAT
GLUELESS
1. Locate puncture hole in the tube.
2. Clean and roughen the area around the hole with the supplied scuffer
3. Peel off the backing from the patch and apply the patch over the hold while avoiding
touching the sticky (glue) side
4. Press and hold the patch firmly for 30 seconds
5. Reinstall tube and inflate
GLUE
1. Locate puncture hole in the tube.
2. Clean and roughen the area around the hole with the supplied scuffer
3. Apply glue and wait approximately 2 minutes or until glue is tacky
4. Press and hold the patch firmly for 30 seconds
5. Reinstall tube and inflate
TIRE BOOT
In the occurrence of a rip, slice, or tear in your tire, this boot can be used as a patch between
your tire and tube to help prevent your tube from blowing out of the damaged tire. Simply
remove the clear film to expose the glue and place the boot over the rip. Once you’ve
reached your destination, immediately replace your tire with a new one
Atsiliepimų nėra, būk pirmas!