$tab
$key
Guidelines for Replacing E-bike Components:
Before you replace components on your e-bike, please note the guidelines for replacing components on CE-marked e-bikes / pedelecs with pedal assistance.
Specifications:
Application:All MountainWheel Size:27.5"Suspension Type:airTravel:120 mm, 130 mm, 140 mmSteerer Tube:1 1/8" – 1.5" taperedAxle Type:thru-axleWheel Standard:15 x 110 mm (Boost)Brake Mount:Disc PM7 (direct mount 180 mm)
Technical Information:
Offset:37 mm, 44 mmSteerer Tube Diameter (Stem):28.6 mmSteerer Tube Diameter (Crown Race):40 mmOver Locknut Dimension:110 mmStanchion Tube Diameter:35 mmMaterial Steerer Tube:aluminiumCrown Material:aluminiumStanchion Tube Material:aluminiumLower Tube Material:magnesium
Adjustment Options:
Compression:low-speed, high-speedRebound:low-speedSuspension Stiffness:via air pressureRemote:noTravel Adjustment:no
Approved For:
Tyre Size (max.):81 mm (tyre width)Note:For individual tyres, tyre clearance must be checked with the fork fully compressed and the tyre fully inflated. It should be at least 6 mm all around.Rotor Size (max.):220 mmWeight Limit:150 kg (system weight)
Features:
- 27.5" suspension fork with many tuning options for All Mountain
- Charger-3.1-RC2 damping with independent adjustment of low- and high-speed compression, with less compression damping in open LSC position and more support in closed HSC position than previous generation
- ButterCups for smooth riding absorb 20% of lighter, high-frequency vibrations and thus prevent fatigue
- DebonAir+ air spring with more volume than DebonAir absorbs smaller bumps even better and simultaneously sits higher in the travel
- Reduced friction due to longer Ultimate bushings with higher overlap than the previous model
- 35 mm stanchion tube diameter for a good ratio of stiffness and low weight
- Low-friction SKF wiper seals for high durability and good suspension behaviour
- With Maxima Plush Dynamic Suspension Lube for low friction and good durability
- Crown adjust
- Torque cap dropouts for increased stiffness
- With screw-on torque cap adapters for simplified use with standard end caps
- Also suitable for e-bikes
- Outer diameter of the fork crown 58 mm
- Fork crown light, milled and anodised
140 mm / 1.5 tapered / 15 x 110 mm / 44 mm:
Travel:140 mmOffset:44 mmAxle to Crown:532 mmModel ID:FS-PIKE-ULT-C2Manufacturer Numbers:00.4021.038.000 (gloss silver), 00.4021.038.003 (ultimate high gloss black)
Contents:
- 1 x RockShox Pike Ultimate Charger 3.1 RC2 DebonAir+ Boost 27.5" Suspension Fork
- 1 x RockShox Maxle Stealth thru-axle
- 1 x RockShox fender
- 2 x RockShox Bottomless Token
- 1 x star nut
- 2 x RockShox end cap adapters
- 2 x screw
Atsiliepimų nėra, būk pirmas!